Human resourcesTechnical supportOmbudsperson Process Español       English
OEM Division

SAP 6000 MV Soft Starter

SEDECAL CONTROL SAP 6000 soft starter is suitable for MEDIUM VOLTAGE (MV) motors.

SAP 6000 limits inrush current during motor start up, making a soft start in ramp whose parameters are totally programmables. In this way motor coils are protected against overcurrents and mechanical parts (shafts, bearings, etc), against undesired mechanical stress.

Thanks to its fine control, motor preventive and corrective maintenance and reposition are significantly reduced. Moreover, section of distribution cables and power from the electrical company could be lowered.

In this way, installation and operation costs are reduced contributing to the economy and efficiency in installations operated with motors.

SEDECAL CONTROL offers the control (by means of a PLC) for the sequencial starting of several motors with only one Soft-Starter.


CATALOGUE: Motor Soft Starter SAP 6000 (MV)

Contact us for any inquiry or further information at:

SAP 6000 MV Soft Starter
Sequential starting of several motors
Desalination plant: High pressure pumps



Working Voltage

2.2kV, 3.3kV, 4.16kV, 5.5kV, 6kV, 6.6kV, 11kV and 13.2kV.

Power from 250kW
Frequency 45 - 65Hz
Overload during 120s 3.5 times nominal current
Overload during 90s 4 times nominal current
Permanent overload 1.2 times nominal current
Motor thermal protection Programmable and according to IEC 255-8 standard
* All specifications are subject to change without notice



Sedecal OEM DivisionMedical Ozone DivisionVeterinary Division
Industrial DivisionMolecular Imaging DivisionSubcontracting Division
Realizado por Netereo
      © 2007 SEDECAL - Sociedad Española de Electromedicina y Calidad S.A. Contact | Privacy Policy | Legal Note | Web Map