Challenge X Ceiling Suspension System is a new generation of integrated system for all conventional radiographic applications in combination with a High Frequency Generator, Radiographic Table, and Wall Bucky with digital control system.
The system has been designed focusing on flexibility and friendly use. It can also be configured depending on your exact clinical requirements, including: chest, spine, complete skeletal, abdominal, urological and tomography (optional) studies.
The radiographic elevating table is a heavy-duty table with a four-way floating table-top, designed in order to increase patient comfort and to facilitate the operator’s work in cases of general radiography and/or special applications.
With the adequate selection of the X-ray tube, generator and tube support, it can be used for tomographic applications (optional).
The variable height feature makes patient positioning very easy and it is particularly well suited for environments with a large number of trauma, geriatric, paediatric and orthopaedic cases.
Simple, ergonomic and robust design, to withstand intensive hospital use
Hands free operation with foot pedal control.
Smooth and extra optimized elevating mechanism for outstanding patient comfort. Standard lifting capability with a “Super-lift” feature to handle 300 kg. (660lbs.).
The table base, designed in high strength steel, houses the electronic controls.
Anti-collision system incorporated
Adjustable automatic stops at 3 height levels: maximum, minimum and intermediate.
Four-ways floating table top with electromagnetic brakes
12” TFT Bigger Touch-screen with user-friendly GUI and increased resolution with no bad viewing angles
Integration with Sedecal generator and digital imaging console
Remote maintenance (Ethernet)
Error logs
Automatic collimation via CAN bus
Interlock management
Tracking out of the detector centre
Service tool for calibration and configuration
Dead-man button
Remote control
Geometry information: SID, ANG, ROT, Wall-stand height, etc.
Error information
OTC State: In motion, not aligned, Centred, Interlock
Several languages
Inches/mm
Configurable look (colours, fonts, …)
Geometry user-guidance to find detector’s centre.
Patient name
APR information
Collimator status (only with automatic collimation option)
Generator parameters
Linear stitching with wall stand (only with motorized height Wall stand option)
12” TFT Bigger Touch-screen with user-friendly GUI and increased resolution with no bad viewing angles
Integration with Sedecal generator and digital imaging console
Remote maintenance (Ethernet)
Error logs
Automatic collimation via CAN bus
Interlock management
Tracking out of the detector centre
Service tool for calibration and configuration
Dead-man button
Remote control
Geometry information: SID, ANG, ROT, Wall-stand height, etc.
Error information
OTC State: In motion, not aligned, Centred, Interlock
Several languages
Inches/mm
Configurable look (colours, fonts, …)
Geometry user-guidance to find detector’s centre.
Patient name
APR information
Collimator status (only with automatic collimation option)
Generator parameters
Linear stitching with wall stand (only with motorized height Wall stand option)
TILTING WALL STAND
WITH AUTOPOSITIONING AND MOTORIZATION
Ergonomic and robust design, to withstand intensive hospital use.
Prepared for Auto-Positioning function with the ceiling suspension.
Motorized Vertical Travel, Tilting and Rotation to minimized the positioning effort of the technician and full Auto-Positioning.
Intuitive and easy release buttons. Effortless motions, all of them counterbalanced.
System possibility of Auto-tracking and Auto-Positioning with the ceiling suspension
Auto-Positioning with the Wall-Stand:The Ceiling Suspension automatically moves to the position with vertical Wall-Stand, according to the SID, angulation of tube, tilting and vertical detector position specified during the configuration.
Auto-Positioning with the Table:The Ceiling Suspension automatically moves over the Table, according to the SID, angulation of tube and longitudinal detector position specified during the configuration.
Free Position in the room:The Ceiling Suspension automatically moves to any longitudinal, transversal vertical, angular and rotational position specified during the configuration.
Auto-Tracking movement of the Ceiling Suspension, following the detector/bucky, with two possibilities:
Ceiling Suspension with the Wall Stand:When the Ceiling suspension is moved manually or moved with remote control up or down, the Wall Stand detector/bucky will follow it in parallel, until it is centred again with it.(A)
When the Ceiling suspension is angulated manually or angulated with remote control the Wall Stand detector/bucky will follow it, until it is centred again with it.(B)
When the detector/bucky in the Wall Stand is manually moved, moved with remote control or moved with the wall stand pedals up or down, the Ceiling Suspension will follow it in parallel, until it is centred again with it.(C)
Ceiling Suspension with the Table:When the Detector in the Table is moved left or right manually, the Ceiling Suspension will follow it, maintaining X-Ray beam and detector aligned.
When the Ceiling suspension is moved left or right manually or with the remote control, the Ceiling detector holder will follow it, maintaining X-Ray beam and detector aligned.
When the tube is angulated manually or with the remote control, the Ceiling detector holder will follow it, maintaining X-Ray beam and detector aligned.
When the Table is moved up or down with the pedals, the Ceiling Suspension will follow it, maintaining a constant SID.
Free Position in the room:The Ceiling Suspension automatically moves to any longitudinal, transversal vertical, angular and rotational position specified during the configuration.
Política de cookies
Utilizamos de terceros para mejorar la experiencia de navegación, y ofrecer contenidos de interés. Al continuar con la navegación entendemos que se acepta nuestra política de cookies. Más información aquí